Browsing Mechanical, Manufacturing & Biomedical Eng by Title
Now showing items 316-335 of 894
-
An experimental investigation of forced convective liquid immersion cooling of a 12-cell li-ion battery module
(2024)This study details an experimental investigation of forced convective liquid immersion cooling of lithium-ion batteries. Twelve Samsung INR 18650 20S cylindrical cells, each with a nominal voltage of 4.2 V and nominal ... -
Experimental Investigation of Heat Transfer Enhancement by Pulsating Flow in a Minichannel
(2021)The increasing power density requirements of next generation high performance electronic devices has resulted in ever-increasing heat flux densities which necessitates the evolution of new liquid-based heat exchange ... -
An experimental investigation of liquid immersion cooling of a four cell lithium-ion battery module
(2024)The thermal management of a lithium-ion battery module subjected to direct contact liquid immersion cooling conditions is experimentally investigated in this study. Four 2.5 Ah 26650 LiFePO4 cylindrical cells in a ... -
Experimental investigation of small diameter two-phase closed thermosyphons charged with water, FC-84, FC-77 & FC-3283
(Elsevier, 2009)An experimental investigation of the performance of thermosyphons charged with water as well as the dielectric heat transfer liquids FC-84, FC-77 and FC-3283 has been carried out. The copper thermosyphon was 200 mm long ... -
Experimental investigations in turbomachinery noise-source identification
(Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2014)The exact contribution of each of the various core-noise sources within modern turboshaft engines to the noise radiated from the engine exhaust and into the surrounding environment is poorly understood. The objective of ... -
Experimental Investigations of Coherence Based Noise Source Identification Techniques for Turbomachinery Applications - Classic and Novel Techniques (AIAA-2011-2830)
(2011)Coherence based noise source identi cation techniques utilise the ordinary linear coherence function between two signals to identify the contribution of one or more sources to the noise measured at a location of interest. ... -
Experimental study of aeroacoustic noise production through combined flow measurements and array signal processing
(Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2013)The underlying processes behind sound generation in turbulent flows are still a source of debate. The investigation presented in this thesis focuses on the experimental approaches that aim to clarify this issue by estimating ... -
Experimental study of flow dynamics in close-coupled catalyst manifolds
(2007)Time-resolved flow dynamics in an automotive exhaust manifold with close-coupled catalyst are investigated experimentally on a charged motored engine (CME) flow rig. Flow similarity between CME ... -
Experimental Study of Gas Injected Bubble Growth from Submerged Orifices
(2013)This work investigates the mechanism of adiabatic gasbubblegrowth from submergedorifices with the view of elucidating the interdependence of the bubble shape and the pressure field during growth and departure. Air injection ... -
Experimental study of realistic low noise technologies applied to a full scale nose landing gear
(2021)The landing gear system is the dominant airframe noise source for most modern commercial aircraft during approach. This manuscript reports the results from the ALLEGRA (Advanced Low Noise Landing (Main and Nose) Gear for ... -
An Experimental Study to Determine the Optimal Access Route for Renal Artery Interventions
(2013)Objective The standard approach for endovascular treatment of the renal artery is access via the common femoral artery. However, approximately one in eight patients have a renal artery take-off angle that is less than ... -
Experimental Validation of a Computational Fluid Dynamics Methodology for Transitional Flow Heat Transfer Characteristics of a Steady Impinging Jet
(2014)This paper presents a computational fluid dynamics (CFD) methodology to accurately predict the heat transfer characteristics of an unconfined steady impinging air jet in the transitional flow regime, impinging on a planar ... -
An experimental-numerical method for estimating heat transfer in a Bridgman furnace
(2014)Direct measurement of heat flux and heat transfer coefficients in a Bridgman furnace is not always possible using traditional methods. This study characterised a vertical tubular Bridgman furnace using experimental data ... -
An experimental-numerical study of heat transfer enhancement in a minichannel using asymmetric pulsating flows
(2023)The development of current and next generation high performance electronic devices has led to miniaturization in more densely packed spaces. The increasing power levels has resulted in ever-increasing heat flux densities ... -
Exploring the Applicability of Robot-Assisted UV Disinfection in Radiology
(2021)The importance of infection control procedures in hospital radiology departments has become increasingly apparent in recent months as the impact of COVID-19 has spread across the world. Existing disinfectant procedures ... -
Exploring the roles of integrin binding and cytoskeletal reorganization during mesenchymal stem cell mechanotransduction in soft and stiff hydrogels subjected to dynamic compression
(2013)The objective of this study was to explore how the response of mesenchymal stem cells (MSCs) to dynamic compression (DC) depends on their pericellular environment and the development of their cytoskeleton. MSCs were first ... -
Exploring the roles of integrin binding and cytoskeletal reorganization during mesenchymal stem cell mechanotransduction in soft and stiff hydrogels subjected to dynamic compression.
(2014)The objective of this study was to explore how the response of mesenchymal stem cells (MSCs) to dynamic compression (DC) depends on their pericellular environment and the development of their cytoskeleton. MSCs were first ...